Gamewell Smart Start IDENTIFLEX 630, Руководство по установке и эксплуатации

Страница: 38 / 226

IdentiFlex 630 Installation and Operation Manual
S
mart
S
tart Capable
9-25-96
28
Analog Addressable Card
Circuit 1 Terminal # Designation Description
Lower 1 +24 +24 vdc
Terminal 2 +24 R +24 vdc return
Block 3 L1 Common (-)
4 L1R Common (-) return
5 L2 Data
6 L2R Data return
Circuit 2 Terminal # Designation Description
Lower 7 +24 +24 vdc
Terminal 8 +24 R +24 vdc return
Block 9 L1 Common (-)
10 L1R Common (-) return
11 L2 Data
12 L2R Data return
Circuit 3 Terminal # Designation Description
Upper 1 +24 +24 vdc
Terminal 2 +24 R +24 vdc return
Block
3 L1 Common (-)
(optional)
4 L1R Common (-) return
5 L2 Data
6 L2R Data return
Circuit 4 Terminal # Designation Description
Upper 7 +24 +24 vdc
Terminal
8 +24 R +24 vdc return
Block
9 L1 Common (-)
(optional) 10 L1R Common (-) return
11 L2 Data
12 L2R Data return
Analog Circuit Wiring Requirements and Limitations :
1. Cable length per circuit - 4,000 feet maximum including all "T-tap' runs. “T-Tap” wiring is
not allowed on signal circuits.
2. Use twisted cable wherever possible, even when in conduit.
3. Twisted cable required on all open wiring runs involving 1,000 Ft. or more.
4. Avoid running circuits parallel with power wiring for any distance.
5. Avoid running circuits parallel with cables having high switching rates.
6. Avoid running circuits parallel with fluorescent fixtures.
7. Avoid running analog circuits parallel with signal circuit wiring.
8. Shield signal circuit wiring, even if in conduit, if run together with analog circuits.
9. Maximum conductor resistance for circuits is 25 ohms.
Table 4