Gamewell Smart Start IDENTIFLEX 630, Руководство по установке и эксплуатации

Страница: 81 / 226

IF630 Programming 5/26/01
___________________________________________________________________________________________
Rev 3.0 71
Start of Dictionary #1
End of Dictionary #1
Start of Dictionary #2
End of Dictionary #2
Start of Dictionary #3
End of Dictionary #3
Start of Dictionary #4
End of Dictionary #4
Start of Dictionary #5
End of Dictionary #5
Press Enter Key to Continue.
Download Dict.
Selecting Download from the Display Dictionary Menu will prompt the system to transmit
the complete set of 5 dictionaries to the RS-232 port. When this is selected, the system
prompts the user to perform several steps. These steps are the actions required to receive an
ASCII file when using PROCOMM communications software. When using alternate
software packages follow the procedure required for that software to receive an ASCII file.
The next CR the system receives will start the transmission of the file.
Display Dictionary Menu
1=Display 2=Download 0=Exit
>2
Ready to Download Dictionary File.
To Download:
1. Press PgDn
2. Choose 7 (ASCII)
3. Enter Filename
Display Events The display events selection will prompt the CPU to output it’s complete history log to the
RS-232 port. The history log will contain all information regarding the system status
changes for the previous 1000 events or since the last time the system SmartStart™ feature
was invoked.
Display Menu
1=Config 2=Dict 3=Events
4=Misc 0=Exit
>3
**** Start of Event Buffer ****
Status:NORMAL 03/27/95 15:08
Press Enter Key To Continue
Display, Misc. When 4 (Misc) is selected from the Display menu, a sub-menu of selections is displayed.