Game ready Equine 550250, Руководство пользователя

Страница: 10 / 24

8
Filling the Ice Box
Stand unit upright. then unplug the unit from the electrical outlet. to open the ice box lid, pull up on the latch
on the end panel of the Control Unit. Fill ice box with ice to the rim of reservoir. For maximum cooling duration,
use cubed ice. Pour cold water over ice until the reservoir is about one third full. dry off the rubber gasket to
ensure a good seal. Close lid securely and lock into place by pulling down on the latch.
Note: the system provides cooling to the Wrap on less ice but we recommend you fill the ice box completely.
Caution: do not pour hot water into the ice box.
refilling the ice box
the ice will melt during treatment. Check the ice box frequently. If little or no ice remains, then refill the ice box
to assure maximum cooling. If the unit is turned on its side, place it back in its upright position before opening
the ice box lid by pulling up on the latch. Press the power button to turn off the unit. Unplug unit from the AC
adapter and empty excess water from ice box. Fill the reservoir to the rim with ice. Pour cold water over ice
until reservoir is about one third full. Close the lid securely and resume therapy.
Note: Ice can be added to the Control Unit while it is running (as long as it is standing upright).
Connecting the Hose to the Control Unit
the hose connector snaps easily into place on the end panel of the Control Unit. When inserted correctly, the
disconnect button will be on top. to disconnect, simply press the button and remove the connector from its
port. When disconnecting the hose from the Control Unit, it is normal for a few drops of water to drip from
the connector hose nozzle. Be sure Not to hold the button down while connecting the hose to the
Control Unit.
C o N t r o l U N I t S E t U P
Ice Box
Lid Supports
Latch