Game ready Equine 550250, Руководство пользователя

Страница: 13 / 24

11
G E t t I N G S t A r t E d
1. Pull up latch to release and open ice box lid.
2. Fill reservoir to the rim with ice.
3. Pour cold water over ice until the reservoir is about one third full.
4. Close lid securely.
Caution:
If you pack the Control Unit with ice, be careful not to slam the lid shut because you
might break the supports that hold open the ice box lid.
5. Place the Control Unit either:
A) in its upright position or
B) on its side with control panel right side up. (See page 6)
6. Connect AC adapter to Control Unit dC Jack; plug into electrical outlet.
7. Secure the Wrap to the horse as instructed in the Wrap use guide that accompanies the Wrap.
8. Connect the hose to Control Unit and the Wrap.
9. Press power button.
10. the system will default to low pressure. Press the pressure button on the control panel to
adjust the level of compression. A corresponding icon will appear on the display panel as
shown on page 7.
Note:
the pressure level cannot be adjusted while the system is in use. to adjust the pressure, press the
pause button, change the pressure to the desired mode, and then press the start button to resume therapy.
11. the system defaults to a 15-minute treatment time. Press the plus or minus keys to adjust the timer
in 5-minute increments. If you would rather not use the timer, just press the timer button once and
the display will change to zero and begin counting elapsed time after you press start.
12. Press the °C/°F button to choose your desired temperature display mode.
13. Press start button.
14. If you set the timer, the alarm will sound when time is up and the Control Unit will stop and stay
in pause mode.
15. remove Wrap by disconnecting the hose from the Wrap then remove from the horse’s leg.
Caution:
do not disconnect the hose from the Wrap while the Control Unit is still running.