G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
MegaV2 250 Installation Guide, Release 2.2
40
3.
I
NSTALLING THE
LCD
SCREEN
This chapter explains how to install the LCD display screen. The LCD screen can be installed on
the front of any of the power modules that are at about eye-level. (The only limitation is that the
module must be within reaching distance of the communication/power cable which must be
connected to the right side of the LCD screen – see Figure 44).
To avoid damage to the LCD screen, it should be installed only on a module that is already in
place in the
MegaV2 250
frame, and should be removed from a module before that module is
removed from the
MegaV2 250
frame.
1
.
Open the small compartment on the center of the power module's front panel to uncover
the mounting post for the LCD screen and the communication cable. The door is hinged at
the top and opens from the bottom. You can use the blade of a small, flat screwdriver to
gently pry the door open from the bottom.
Opening the cover reveals the mounting post.
Figure 39: Opening the cover of the LCD mounting point
Figure 40: The mounting post is revealed
2
.
Attach the clamp to the mounting post. See Figure 41 and Figure 42. Tighten the
thumbscrew on the side of the clamp so that the clamp is firmly secured to the mounting
post.
