38
Copyright © GamaBit Ltd. 2017 - 2020. All right reserved.
12.3 E-mail Settings
Available from the Houseper application only. Please, check also the E-mail
Notifications section of the current User Guide for more infromation.)
12.4 Configure Alarm Notifications
Available from the Houseper application only.
This section is for configuring default settings for sending notifications. Each device
inherits these settings when it is added. Subsequently they can be changed for each
specific device.
1.
Alarm indicator - optional only if the event is an alarm type.
2.
Event name with optional description - the name may be quite specific, such as
Tamper, Battery, etc. or collective as shown on the picture above. Alarm 1 and
Alarm 2 are collective names relating to particular devices used for Fire indication,
Water Overflow indication, Intrusion indication, Movement indication, Presence
indication, Panic, Emergency, etc.
3.
Defines sending notifications to all smart phones/tablets configured.
4.
Defines sending emails to all email addresses configured.
5.
Defines the activation of a siren if it has been added to the system and if it is
active.
6.
Defines the activation of a siren if it has been added to the system and if it is not
active - there are cases that can be defined as very urgent and it would be
important to have the siren triggered.
The Restore options are displayed at the bottom of the Configure Alarm notifications
section. These options apply for automatic clearing of alarms when receiving a live
report. When a device has an active alarm, such as an open door and this alarm
disappears when the door is closed, some devices depending of their type send a report
to cancel the existing alarm. There are two options here: