26
Copyright © GamaBit Ltd. 2017 - 2020. All right reserved.
This option is used to configure and execute infrared (IR) commands from the application
to the devices supporting the corresponding commands and vice versa - to manage
Zigbee devices via IR remotely.
1.
A list of all configured IR commands that can be executed locally and remotely
through the application. You can control all IR devices that you usually operate at
home, such as the air conditioner, TV, etc.
2.
Zigbee to IR Commands configuration - when you enter this menu, follow the
instructions to configure the desired commands. All configured IR commands are
displayed in List 1 above. When executing such a command, the controller will
send a Zigbee command to the current device that in its part will send the stored
IR command. The end result is exactly the same as if you had used your old remote
control.
3.
IR to Zigbee Commands configuration - when you enter this menu, follow the
instructions to configure the desired commands. With these commands, you can
convert any IR remote into a Zigbee remote control. For example, you can turn on
and off Zigbee devices by using the TV remote. When executing such a command
the remote will send an IR command to the current device that will perform the
stored Zigbee command. The end result is exactly the same as using the Houseper
application to manage the devices in your home automation system.
4.3.8 Zone
