GALILEI GIANO 70, Руководство пользователя и по обслуживанию

Страница: 33 / 48

b Cod. 80000230a – 01.12.2014
product label). For the modification of the set point make reference to the following chapter of this
manual.
Attention:
The cabinet is equipped with a digital thermometer placed inside the display area,
(commonly inside the air-intake grill, just behind the front glass). The preserving temperature is exclusively
displayed by this thermometer, and not by the display of the electronic controller. The readings provided
by the display of the controller cannot be directly considered as reference to assess the preserving
temperature and the performances of the cabinet. This is due to the mounting position of the temperature
sensors, which are placed according technical criteria related to the temperature inside the cabinet, but not
directly expressing its value. For this reasons, the temperature readings may be significantly different. This
is a normal condition, therefore such occurrence does not represent an anomaly or a technical fault.
In order to modify the working temperature (preserving temperature) it is necessary to consider the
temperature displayed by the digital thermometer inside the cabinet, and then apply the desired increase /
decrease to the set-point value. Before to check again the temperature inside the cabinet, wait some
minutes after the modification of the set-point parameter. If necessary, repeat this procedure to fine-tune
the preserving temperature inside the cabinet.
User Level Settings
User Interface - display structure and meaning of the graphical icons
The below pictures and table show the layout of the display, the keyboard, and the meaning of the LED
icons and their behaviour (standing or blinking icons) during the normal operation of the cabinet. According
to the model, the upper button on the left side can have the symbol “light” or the writing “AUX”. In some
cases this button is used to activate special functions (e.g. additional heaters for reevaporation of
defrosting water). The different symbol of this button does not affect the function. The intermediate
button on the left side is used to operate a manual defrost, and has this function also in the case the button
is blank. The below table shows the led-symbols and their related meaning (standing or blinking light) in the
normal conditions of operation or in case of alarm.