GALILEI GIANO 70, Руководство пользователя и по обслуживанию

Страница: 43 / 48

l Cod. 80004170 – 04.04.2018
dAo Pr2
Delay of temperature alarm at startup
h 0÷23h50’ 2
AP2 Pr2
Sensor for temperature alarm of condenser (np,P1,P2,P3,P4)
- np÷P4 np
AL2 Pr2
Condenser low temperature alarm
°C -55÷150 -40
AU2 Pr2
Condenser high temperature alarm
°C -55÷150 110
AH2 Pr2 Differential for condenser temp. alarm recovery °C 0.1÷25.5 5
Ad2 Pr2 Condenser temperature alarm delay min 0÷254 15
dA2 Pr2 Delay of cond. temp. alarm at start up h 0÷23h50’ 1.3
bLL Pr2 Compressor Off for condenser low temp. alarm - n÷y n
AC2 Pr2 Compressor Off for condenser high temp. alarm - n÷y n
tbA Pr2 Alarm relay disabling - n÷y n
oA2 Pr2 3
rd
relay configuration
ALr= do not select it
dEF=do not select it
dF2= do not select it
Lig= do not select it
Aus=Aux
onF= do not select it
Fan=do not select it
db=do not select it
dF2= do not select it
AUS
Aop Pr2 Alarm relay polarity (oP=opening, CL=closing) - oP÷CL oP
i1P Pr1 Digital input polarity (oP=opening, CL=closing) - oP÷CL oP
i1F Pr1 Digital input configuration
Aus=disabled
dor=door switch input
EAL=generic alarm
bAL=serious alarm mode, CA alarm is displayed
PAL=pressure switch (comp. OFF in case of alarm)
dFr= start defroston digital input
Htr= inversion heating-cooling
ES=Energy saving, change the setpoint -> SET+HES
AUS
did Pr1
Digital input alarm delay
min. 0÷255 5
Nps Pr2
Number of activation of pressure switch
- 0÷15 15
odc Pr2 Comp. status with open door (no, Fan=cmp.On /CPr;F_C cmp. OFF) - - no
rrd Pr2 Regulation restart with open door alarm - n÷Y n
HES Pr2 Differential energy saving (e.g. night time)-activation via dig. input °C -30÷30 0
Adr Pr2 Serial address - 0÷247 1
PbC Pr2 Kind of probe - ptc÷ntc ntc
OnF Pr2 on/off key enabling - pu÷ES nu
LPC Pr2 Configuration light button - nu÷FHU AUS