GALILEI GIANO 70, Руководство пользователя и по обслуживанию

Страница: 8 / 48

3 Cod. 80000070b – 23.04.2013
Once the cabinet is placed on the final point of installation, remove the protecting film and all fixing plates.
The cabinet will look like the above pictures. Endwalls, bumper-rails and front-glasses are packaged
separately and placed on the display decks inside the cabinet.
For the installation of the parts mentioned above, make reference to the section “SETTING-UP AND
STARTING THE UNIT” of this manual. We remind you that the installation must be carried out by skilled
personnel only, assembly instructions are therefore to be found in the section of this manual dedicated to
technical staff (“SECTION RESERVED TO INSTALLATION AND MAINTENANCE PERSONNEL”)
Weights
Giano 937: 125 kg (w/o packaging) 150 kg (with packaging)
Giano 1250: 135 kg (w/o packaging) 160 kg (with packaging)
Giano 1875: 180 kg (w/o packaging) 205 kg (with packaging)
Noise level
Noise level of the cabinet can vary according to the environment conditions (temperature and humidity
inside the P.o.S.) and to the cleaning level of the condenser. The tests carried out in our lab have recorded a
noise level of 55 dBa (according the conditions defined in the norm EU 89/392/CEE).
Maximum Loading
Maximum Loading for Giano 70 is 90kg/m2 uniformly applied.
Considering the available display surface of both models, the overall limits are:
Giano 70 L:937 60kg
Giano 70 L:1250 80kg
Giano 70 L:1875 120kg
Position of water draining outlet and power connection
The cabinet is equipped with a built-in condensing unit and an automatic system for the re-evaporation of
the condensing water. In normal conditions (operation in the climate class certified for this model), no floor
water-outlet or additional cable ducts are to be provided; they will have instead to be provided in case of
possible remote versions, served by external condensing units.
For this purpose, the positions of water draining-outlet, evaporator piping opening and cable-exit are
shown in the below picture. Dimensions are referred to the points located on the bottom part of the
injected carcass, respect the basement of the cabinet itself. The below dimensions are related to a cabinet
in horizontal position.