Gaggenau CI 292 600, Инструкция по использованию и уходу

Страница: 15 / 96

15
Twistpad with twist knob
The twistpad is the area in which you can use the twist
knob to select the elements and heat settings.
The twist knob is magnetic and is placed in the middle
of the area marked on the twistpad. To activate an
element, press the twist knob so that it tilts in the
appropriate area for the required element. Turning the
twist knob selects the heat setting.
Position the twist knob on the twist pad so that it is in
the center of the indicators that delimit the twist pad
area.
Note: Even if the twist knob is not entirely central, this
will not under any circumstances affect how the twist
knob works.
Remove the twist knob
Removing the twist knob activates the wipe-protection
function.
The twist knob can be removed during cooking. The
wipe-protection function is activated for 10 minutes. If
the twist knob is not returned to its position before this
time elapses, the cooktop switches off.
9
WARNING
Risk of fire
If during these 10 minutes a metallic object is
placed in the twistpad area, the cooktop may
continue to heat up. Therefore, always switch off
the cooktop using the main switch.
Storing the twist knob
A strong magnet is located inside of the twist knob.
Keep the twist knob away from magnetic data carriers
such as credit cards and cards with magnetic strips.
Otherwise, these data carriers may be damaged beyond
repair.
The magnet may also cause faults on televisions and
screens.
Note: The twist knob is magnetic. Metal particles stuck
to the bottom may scratch the surface of the cooktop.
Always clean the twist knob thoroughly.
Operating the appliance
This chapter explains how to set a element. The table
shows heat settings and cooking times for various
meals.
Switching the cooktop on and off
Switch the cooktop on and off using the main switch.
To switch on: Position the twist knob in the area in
which it can be used. Touch the
#
symbol. The symbols
for the elements and the functions available at this time
light up.
‹
lights up next to the elements. The cooktop is
ready for use.
To switch off: Touch the
#
symbol until the indicator
goes out. All elements are switched off. The residual
heat indicator remains lit until the elements have cooled
down sufficiently.
Notes
‒ The cooktop switches off automatically if all
elements have been switched off for more than 20
seconds.
‒ The selected settings are stored for 5 seconds after
the cooktop has been switched off.
If during this period, the element is switched back
on, the previously set heating settings flash. To
apply these settings, tap on the twist knob within
the next 5 seconds.
If you do not tap the twist knob or if you touch a
different sensor key, all previous settings will be
deleted.
Setting an element
Set the required element using the twist knob.
Heat setting 1 = lowest setting.
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is
shown in the element display as
.5 .