4. Operating System and Equipment
– By pushing the light combination switch up or
down to position
②
and keeping it at this
position, the corresponding turn signal and
also the or in the instrument cluster flash
continuously. If the is released to let it return
to the original position, the flashing stops.
Caution
If any turn signal fails, flashing frequency of
corresponding indicator or in the instrument
cluster will be doubled.
Light switch
With the ignition switch at "ON" position, turn
the light switch
①
to turn on or off AUTO (auto
lighting)*, (position light) or (low beam).
Turn the light switch to "OFF" to turn off all the
lights.
AUTO (Auto Lighting)*
– Turn the light switch to "AUTO" position to turn
on auto lighting.
Hint
•
After auto lighting enabled, lights of the
vehicle will be turned on or off depending on
the environmental light. When the ambient
lighting outside the vehicle dims gradually, the
position lights and low beams are turned on at
the same time. When the ambient lighting
outside the vehicle brightens gradually, the
position lights and low beams are turned off at
the same time.
•
Adjust the auto light sensitivity via "Vehicle
Setting → Light Control → Auto Light
Sensitivity" in the audio system.
84
78
Содержание GS5
Страница 6: ......
