3. Safety Operating Instructions
If the child safety seat has no means for fixing
the seat belt, install a locking clip to the seat belt.
–
With steps 1 and 2 completed, pull upward the
shoulder part of seat belt so that the lap part of
seat belt is no longer loose.
–
Tightly hold the seat belt near the latch plate.
Hold together the two parts of seat belt so that they
cannot slide out of the latch plate. Release the seat
belt from the buckle.
Install the locking clip as shown in the figure.
With the clip as close to the latch plate as possible,
insert the latch plate in the buckle. Perform steps 6
and 7.
Install the ISOFIX System or LATCH System
The installing methods for both ISOFIX
system and LATCH system are similar, LATCH
system has one more anchor point than ISOFIX
system, but the lower anchor point for both
systems can be interchangeable. The seats in the
rear row for this vehicle are equipped with LATCH
system. Therefore, both LATCH and ISOFIX child
seat can be installed.
Warning
When driving, be sure to restrain the child in
the child seat suitable for the child's weight and
body type.
•
The anchoring device for child seat of this
vehicle can only be used to fix the child seat.
•
Do not connect any other things like fastening
belt, hard or sharp objects or other things
other than child seat items to the anchoring
device. Otherwise, it may endanger the child’s
life when accident occurs.
Hint
The lower anchoring point
①
of the rear row
seats is hid in the gap between the seat backrest
and cushion. Manually expanding the gap, you can
see the upper anchoring point
②
at the rear of the
seat backrest.
33
33
Содержание GS5
Страница 6: ......
