GAC GS5, Руководство пользователя

Страница: 133 / 285

4. Operating System and Equipment
Press DUAL soft button again to light off the
button light. The A/C will exit dual-zone control
mode to enter single-zone control mode. The
regional temperature on both sides of the front will
be controlled at the same time:
– Temperature control button (left) to control
temperature in the whole vehicle area.
Air Vent Mode
When button is operated, the air outlet
mode can be switched manually. In AUTO mode,
the A/C system controls the air outlet mode
automatically. When button is operated, the
system switches from AUTO mode to manual
mode.
In Manual mode, pressing pulling/pushing
button can switch among the following several air
vent modes in loop. The sequence is as follows:
–
Face blowing mode: Air is blown out from
the air outlet of the instrument panel.
– Face and foot blowing mode: Air is blown
out from the air outlets of the instrument panel
and the footwell.
– Foot blowing mode: Air is blown out from
the air outlet of the footwell.
– Foot and front windshield blowing mode: Air
is blown out from the defrosting air outlet of
the front windshield and the air outlet of the
footwell.
In AUTO mode, air vent mode is a part of
automatic control logic and selected by the A/C
system automatically. The fundamental factor
affecting the air vent mode is air vent temperature.
When the air vent temperature is high, most of the
air will be blown towards the feet. When the air
vent temperature is low, most of the air will be
blown towards the face.
Hint
• To ensure that A/C system can effectively
control all the air vent modes automatically,
please open all the air outlets.
• Under cold start in winter, the air vent mode
will be switched over from the front windshield
blowing mode in AUTO mode.
133
127