GAC GS5, Руководство пользователя

Страница: 137 / 285

4. Operating System and Equipment
Max Cool Mode
Press pulling/pushing button to light on
the button light and let the A/C system enter max
cool mode. The system will perform the following
settings automatically:
– Turn on the A/C.
– Set the temperature at LO.
– Set the air vent mode as face blowing mode.
– Set the air circulation mode as interior
circulation mode.
– Set the air speed at the air outlet as the
maximum.
Lift/press the
button again to light off
the button light, let the A/C system exit the max
cool mode, and return to the state before the max
cool action.
Air Speed Setting
There are seven air speed scales (1~7). When
button is operated to control the air speed, the
corresponding air speed scale will be shown on the
display:
– By pulling/pushing
button, the air speed
increases/decreases by one scale.
A/C Off
Pull/push OFF button to turn off the A/C
system.
After the A/C system is turned off, button
and button can be operated effectively without
turning on the A/C system. It is ineffective to
operate button. The A/C system can be turned
on by operating A/C button, button or
button.
Air Circulation
Interior Circulation
In case of poor exterior air quality, this mode
can prevent exterior air from entering the vehicle to
form interior circulation of the interior air.
– Pull/push
button. When the button light
goes on, the system will enter interior
circulation mode.
External Circulation
In case of good exterior air quality, this mode
can prevent exterior air from entering the vehicle
and keep the interior air fresh.
– Pull/push
button. When all the button lights
go off, the system will enter exterior circulation
mode.
137
131