FUNAI LED40-H9200M Скачать руководство пользователя страница 3

Страница: 3 / 26

INTRODUCTION

A Note about Recycling

This unit’s packaging materials are recyclable

and can be reused. Please dispose of any

materials in accordance with your local

recycling regulations.

This product consists of materials which can be

recycled and reused if disassembled by a

specialised company.

Following information is only for EU-member

states:

The use of the symbol indicates that this product may not

be treated as household waste.

By ensuring this product is disposed of

correctly, you will help prevent potential

negative consequences for the environment

and human health, which could otherwise be

caused by inappropriate waste handling of this

product.

For more detailed information about recycling

of this product, please contact your local city

office, your household waste disposal service or the shop

where you purchased the product.

Following information is only valid EU-member

States: Disposal of batteries and/or

accumulators

The crossed out wheeled dust bin symbol indicates that

batteries and/or accumulators must be collected and

disposed of separately from household waste.

If the battery or accumulator contains more than the

specified values of lead (Pb), mercury (Hg), and/or cadmium

(Cd) defined in the Battery Directive (2006/66/EC), then the

chemical symbols for lead (Pb), mercury (Hg) and/or

cadmium (Cd) will appear below the crossed out wheeled

dust bin symbol.

By participating in separate collection of

batteries, you will help to assure the proper

disposal of products and batteries and thus

help to prevent potential negative

consequences for the environment and human

health.

For more detailed information about the

collection and recycling programmes available in your

country, please contact your local city office or the shop

where you purchased the product.

Battery Precautions

●

Be sure to follow the correct polarity as indicated in the

battery compartment.

Reversed batteries may cause damage to the device.

●

Do not mix different types of batteries together (e.g.

Alkaline and Carbon-Zinc or rechargeable batteries like ni-

cad, ni-mh, etc.) or old batteries with fresh ones.

●

If the device is not to be used for a long period of time,

remove the batteries to prevent damage or injury from

possible battery leakage.

●

Do not try to recharge batteries; they can overheat and

rupture.

Pb, Hg, Cd

Contents

PRECAUTIONS ................................................................ 2

INTRODUCTION ........................................................... 3

PREPARATION FOR USE ............................................. 6

Antenna Connection ........................................................................ 6
External Connection ......................................................................... 6
Plug In the AC Power Cord ......................................................... 7
Initial Setup ............................................................................................. 7

OPERATIONS .................................................................. 8

OTHER SETTINGS ....................................................... 14

TROUBLESHOOTING GUIDE ................................. 22

OTHER INFORMATIONS .......................................... 23

License Statement .............................................. end of book

Содержание LED40-H9200M



























Результаты поиска

Содержание LED40-H9200M

Отзывы:

Похожие инструкции для LED40-H9200M

Бренды по названию

Популярные бренды

FUNAI LED40-H9200M, Руководство пользователя

Результаты поиска

Содержание LED40-H9200M

Отзывы:

Похожие инструкции для LED40-H9200M

Бренды по названию

Популярные бренды