FUNAI LED40-H9200M, Руководство пользователя

Страница: 12 / 26

5
Press
SOURCE
G
and select input mode you want.
●
Be sure to keep a backup copy of the original files on your device
before you play them back on this unit. We have no responsibilities
for damage or loss of your stored data.
●
When you ready to remove a USB flash memory, at first turn off
the unit to avoid any damage for your data and the unit.
●
A USB flash memory that required its own driver or the device with
a special system such as fingerprint recognition are not supported.
●
This unit is not allowed to use the USB flash memory which requires
external power supply (500mA or more).
●
Only USB 1.1 and 2.0 is supported.
●
This unit can be recognised up to 3,000 files in the USB flash
memory.
●
This unit may not be recognised if the length of the file names is
too long. Only English characters can be recognised.
●
This unit does not support MTP(Media Transfer Protocol) or the
file other than FAT and FAT32 file system. If the file is not supported,
error message appears.
●
When the unit does not recognise the USB flash memory, try
reconnecting it.
It is supported that files to be played back in this unit are recorded
under the following specifications:
<JPEG>
Baseline
17,000x10,000
Progressive 4,000x4,000
<MP3>
Sampling frequency
32 kHz, 44.1 kHz or 48 kHz
16 kHz, 22.05 kHz or 24 kHz
8 kHz, 11.025 kHz or 12 kHz
Constant bit rate 32 kbps - 320 kbps
<WAVE>
Sampling frequency
32 kHz, 44.1 kHz or 48 kHz
Constant bit rate 16 bit PCM (big/little endian),
24 bit PCM (big endian)
EN
12