FUNAI LED40-H9200M, Руководство пользователя

Страница: 6 / 26

PREPARATION FOR USE
Read this first
●
No supplied cables are used with these connection. Please
purchase the necessary cables at your local store.
●
Illustration in the following connection are example. Read
the manual accompanying your device for more detail.
●
Before you connect, be sure your antenna or other device is
connected properly before plugging in the AC power cord.
Antenna Connection
Your TV
VHF/UHF
MIXER
VHF UHF
RF cable
1
Connect an RF cable to
O
(aerial)
Input jack at the
rear of this unit.
2
Plug this unit into an AC outlet.
3
Turns on the main power switch.
4
When the
Standby / Power
indicator on the front panel
lights red, then press
Q
to turn on the unit.
●
If you like to connect an active DVB-T antenna, the antenna must
have its own power supply.
●
It is not possible to power the antenna from the TV.
External Connection
HDMI Connection (HDMI 1 / HDMI 2 / HDMI 3)
HDMI cable
Your TV Your device
●
This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
video signals and 32 kHz / 44.1 kHz / 48 kHz only 2 channel audio
signals (LPCM).
●
You need to select “PCM” for the digital audio output of the device
you connect. Make sure the device outputs the digital audio. Audio
sometimes makes no sound if you select “Bitstream”, etc.
Dear Customer,
By connecting an HDMI cable to your Funai LCD TV,
you have to use only a certified HDMI cable to
guarantee a sufficient immunity against parasitic
frequency radiation.
A certified HDMI cable can be identified by the HDMI
logo on the cable or the cable package.
SCART Connection
SCART cable
Your TV
Your device
Input Output
S-Video Audio (L/R) CVBS RGB Video and Audio (L/R)
Yes Yes Yes Yes
Outputs the RF input
signal converted as CVBS
signal.
Component / Composite Video Connection
AUDIO
COMPONENT
/ VIDEO IN
L
R
Y
/ VIDEO
Pb
Pr
AUDIO
OUT
COMPONENT
VIDEO OUT
audio cable
component video cable
Your TV
Your device
●
This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i video
signals for component connection.
COMPONENT
/ VIDEO
AUDIO
OUT
VIDEO OUT
AUDIO
L
R
Y
/ VIDEO
Pb
Pr
audio cable
composite video cable
Your TV
Your device
●
Make sure the rest of Component Video jacks (Pb/Pr) are
unplugged completely when you plug the Composite Video jack to
Y/VIDEO terminal.
Audio Output Connection
DTV
For digital broadcasting only
DIGITAL
AUDIO
COAXIAL IN
DIGITAL
AUDIO
OUT
COAXIAL
digital audio
coaxial cable
Your TV
Your device
EN
6