Fukuda CardiMax 2, Руководство по обслуживанию

Страница: 15 / 124

v
Preface Reminders to Use the Equipment Safely

Do not ground with a gas pipe. Explosion or fire may result.
MRI

Before performing MRI scans, disconnect the electrodes connected to the patient.

Local heating due to induced electromotive force may cause burns to the patient. For details, refer to the
operation manual for the MRI testing device.
Defibrillator

When using this equipment with a defibrillator, use only the specified lead cable. The use of a lead cable other
than the specified defibrillation-proof type may damage the equipment or compromise safety when the
equipment is used along with a defibrillator.

Do not touch this equipment or patient during defibrillation. It may cause an electric shock.

While using a defibrillator, ECG cannot be displayed or recorded.
High-frequency Surgical Devices

When using this equipment with a high frequency external surgical device (electrosurgical instrument), make
sure the contact between the patient and the ground plate is secured. If the connection is incomplete, the patient
may suffer a burn at the electrode site.

When using with electrosurgical instruments, make sure the contact between the patient and the ground plate
can be sufficiently secured. If the connection is incomplete, the current from the electrosurgical instrument may
run into the electrodes of this equipment and the patient may suffer a burn at the electrode site. The electrode
should also be attached as far away from the surgery site as possible to decrease the risk of burns.

The amount of noise interference is considerably different depending on the electrode position and surgery site.
Place the ECG electrodes as far away as possible from the surgery site and the ground plate.

Plug the electrosurgical instrument into a hospital grade outlet as far away as possible from the outlet of this
equipment. This will reduce interference from the electrosurgical instrument.

While using a high frequency surgical device, ECG cannot be displayed or recorded.
Other Equipments

Do not connect any unauthorized equipments.

Connect so that all equipments satisfy the conditions of operating environment.

Only the peripheral devices and cables specified by Fukuda Denshi should be connected to this equipment
using the specified procedure. For details of the connection procedure, contact your local Fukuda Denshi
service representative.

Contact your local Fukuda Denshi service representative when connecting with other equipments. The
connecting equipment must comply with the IEC or ISO standards, or equivalent safety level. Otherwise, it
may cause hazardous situation such as electric shock to the patient and operator.

When using with other equipments, the environment conditions (including transport/storage) of the connecting
equipments should be also observed. Failure to do so may damage the equipment. For the environment
conditions, refer to the operation manual of each equipment.

The operator should not touch the patient and the system composed of this equipment at the same time. It may
cause hazardous situation such as electric shock to the patient and operator.
Optional Accessories
WARNING

Use only the cables specified by Fukuda Denshi.Use of other cables may result in increase
in emission or decrease in immunity.
WARNING
WARNING
WARNING
WARNING
bl5641