Fukuda CardiMax 2, Руководство по обслуживанию

Страница: 113 / 124

9-9
Chapter 9 Maintenance and Inspection Replacement of the Accessories
Replacement of the Accessories
Replacement Period of Consumable Parts
The following parts and accessories are consumable parts. The standard replacement time is as follows: The parts
may need to be replaced earlier than the time described depending on operating environment.
Any deterioration or abnormal condition is identified during operation or inspection, replace those parts
immediately.
1. Battery pack: 500 times of charging/discharging times
If the battery pack is degraded, the operation time decreases even if the battery is fully charged.
2. Thermal head: approx. 50 km (of continuous printing)
A worn thermal print head lowers the overall printout density and causes missed dots.
3. Paper driver motor: approx 1,000 hours of use (of continuous printing)
A worn paper drive motor results in unstable printing due to irregular paper feed and fluctuating paper speed.
4. Display unit backlight: 20,000 hours
A worn LCD backlight lowers the LCD brightness and may prevent the LCD from illuminating.
5. Battery for the clock: 6 years (when stored at a temperature of 25°C)
The battery powers the internal clock. When the battery is depleted, the date and time cannot be correctly recorded.
The service life may be shortened when used in high temperature, low temperature or high humidity conditions.
When the battery is depleted and the message "Replace the backup battery. The clock will be reset. (For more details,
contact your local Fukuda Denshi service representative.)" is displayed, replace the battery as soon as possible.
bl5875