59
- Troubleshooting
The Tablet PC turned on with a
series of beeps and the display is
blank.
Power On Self Test detected a failure
which does not allow the display to
operate.
Contact your support representative.
The display goes blank by itself
after you have been using it.
Power management timeouts are set
for short intervals and you failed to
notice the display come on and go
off again.
Push the Power/Suspend/Resume switch. (The display may be shut off by
Sleep Mode, Auto Suspend or Video Timeout)
The Tablet PC has gone into Sleep or
Hibernate mode because you have
not used it for a period of time.
Push Power/Suspend/Resume switch. Check power management settings
to adjust timeout values to suit your needs.
The display has bright or dark
spots.
If the spots are very tiny and few in
number, this is normal for a large
LCD display.
This is normal; do nothing.
If the spots are numerous or large
enough to interfere with your opera-
tion needs.
Display is faulty; contact your support representative.
Miscellaneous Problems
Error message displayed on the
screen during operation of an
application.
Application software often has its
own set of error message displays.
See your application manual and help displays screens for more informa-
tion. Not all messages are errors some may simply be status.
Problem
Possible Cause
Possible Solutions
