227
PRIMERGY TX300 S4 User’s Guide
No usable system memory
Indicates a memory error. No memory modules are available for the
system. Check the error log and replace the memory module. If the
message still appears, contact an office listed in the "Contact
Information" of "Start Guide".
Memory module disabled! This module is
no longer available for the operating
system.
Indicates a memory error. Turn off the server and check whether the
memory module is installed correctly. If the message still appears,
check the error log and replace the appropriate memory module. If
the message still appears after the replacement, the baseboard must
be replaced. Contact an office listed in the "Contact Information" of
"Start Guide".
No usable CPU
Indicates an installed CPU error. Replace the CPU. If the message
still appears, the baseboard must be replaced. Contact an office
listed in the "Contact Information" of "Start Guide".
Patch for installed CPU not loaded. Please
run the bios flash update diskette.
Check whether proper CPU is installed. If the message still appears
although the installation is proper, the CPU or the baseboard must be
replaced. Contact an office listed in the "Contact Information" of
"Start Guide".
CPU disable! CPU is no longer available
for the operating system.
Indicates a CPU error. No CPU is available for the system. Check
the error log and replace the CPU. If the message still appears, the
baseboard must be replaced. Contact an office listed in the "Contact
Information" of "Start Guide".
Invalid System Configuration Data
Indicates an error of the system configuration. Check whether the
configuration is supported. If the message appears although the
configuration is supported, the baseboard must be replaced. Contact
an office listed in the "Contact Information" of "Start Guide".
Resource Conflict
IRQ, DMA, or I/O address conflicts between an onboard device and
an expansion card. Start up BIOS Setup Utility, select the
[Advanced] menu – the [PCI Configuration] submenu, and check
the setting value of [PCI IRQ Configuration].
If the message still appears, the expansion card or the baseboard
must be replaced. Contact an office listed in the "Contact
Information" of "Start Guide".
IRQ not configured
The IRQ for an onboard device or an expansion card is not
configured. Start up BIOS Setup Utility, select the [Advanced]
menu, and then check and modify the setting of [PCI configuration].
If the message still appears, the expansion card or baseboard must be
replaced. Contact an office listed in the "Contact Information" of
"Start Guide".
Expansion ROM not initialized
Indicates an error of initialization for the PCI expansion ROM.
Disconnect the device and card which has been initialized on the
screen and replace the card. If the message still appears, the
baseboard must be replaced. Contact an office listed in the "Contact
Information" of "Start Guide".
Allocation error static node #
An onboard device or an expansion card cannot be used. Disconnect
the device and card and replace the card. If the message still appears,
the baseboard must be replaced. Contact an office listed in the
"Contact Information" of "Start Guide".
Baseboard Management Controller has
detected an error
Indicates a BMC error. Check the error log, and replace the relevant
part(s). Contact an office listed in the "Contact Information" of
"Start Guide".
table: List of POST error message
Message
Description
Содержание Primergy TX300 S4
