manualshive.com logo in svg

Fujitsu MHY2040BS, Руководство по эксплуатации/техническому обслуживанию

Поделиться
Скачать
Fujitsu MHY2040BS Скачать руководство пользователя страница 132

Interface 

 

(16)  SMART (X 'B0') 

This command predicts the occurrence of device failures depending on the 
subcommand specified in the Features field.  If the Features field contains values 
that are not supported with the command, the Aborted Command error is issued. 

Before issuing the command, the host must set the key values in the Cylinder Low 
and Cylinder High field (4Fh in the Cylinder Low field and C2h in the Cylinder 
High field).  If the key values are incorrect, the Aborted Command error is issued. 

If the failure prediction function is disabled, the device returns the Aborted 
Command error to subcommands other than those of the SMART Enable 
Operations (with the Features field set to D8h). 

If the failure prediction function is enabled, the device collects and updates data on 
specific items.  The values of items whose data is collected and updated by the 
device in order to predict device failures are hereinafter referred to as attribute 
values. 

 

5-54 

C141-E269 

Содержание MHY2040BS



































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды