Fujitsu Siemens Computers PRIMERGY TX200 S4, Руководство по дополнительному обслуживанию

Страница: 7 / 47

TX200 S4
Service Supplement 7
Introduction Overview of the documentation
Extensions and upgrades:
I
For some components only the installation
routine is described in the Options Guide.
Removing these components proceed in
reverse order.
– Extending/replacing the main memory
– Installing a second processor / replacing the
processor / replacing the heat sink
– Installing accessible drives, like floppy disk
drive, DVD/DVD-RW drive, multibay etc.
– Installing a hard disk extension box
– Installing a ServerView Local Service Panel
– Installing expansion boards in the PCI slots
– Inserting the RAID key
– Installing a parallel interface
– Converting to hot-plug PS and to redundant
fans
– Converting from the floorstand model to the
rack model
– Removing and installing the system fans
Options Guide
Cabling
Replacement routines:
–
Replacing the operating panel board
– Replacing the Front USB cable
– Replacing the standard PS
– Replacing the Power backplane
– Replacing the 3.5“ HDD backplane
– Replacing the 2.5“ HDD backplane
– Replacing the intrusion switches
– Replacing the chassis ID board
– Replacing the system board
Service Supplement
Board layout
BIOS setup BIOS Setup
Information/procedure Manual
Table 1: Overview of the documentation TX200 S4