Fujitsu Siemens Computers PRIMERGY TX200 S4, Руководство по дополнительному обслуживанию

Страница: 27 / 47

TX200 S4
Service Supplement 27
Replacement routines Replacing the Power backplane
Figure 10: Removing the PS safe guard
V
CAUTION!
Before removing the PS safe guard, the server must be disconnected to
the main voltage because of energy hazard on the Power backplane.
Ê
Remove the screw (see the circle) and take out the PS safe guard. Take care
that the screw doesn’t fall inside the housing.
Ê Disconnect all power cables from the Power backplane.
Ê Remove the three screws of the PS cage at the rear side of the server and
pull out the PS cage.