Fujitsu Siemens Computers PRIMERGY TX200 S4, Руководство по дополнительному обслуживанию

Страница: 38 / 47

Figure 19: Removing the screws
Ê Remove the nine screws from the system board.
Ê Lift the system board slightly using the socket of PCI slot 5, thereby you lift
the system board out of the centre rings of the spacer bolts.
Ê Carefully lift the system board out of the housing in a slight angle. Thereby
you pull the connectors out of the connector panel.
Ê Check the settings on the new system board (for a description see the
Technical Manual of the system board).
Ê
Insert the system board by holding it at a slight angle. Slide the connectors
into the connector panel.
V
CAUTION!
Never take hold of the heat sinks!
Don’t damage the EMI springs to comply with applicable EMC regula-
tions and satisfy cooling requirements and fire protection measures.
Ê Lower the system board carefully into the housing.
1
2
3
4
5
6
7
8
9