Fujitsu Siemens Computers PRIMERGY RX100 S4, Руководство пользователя

Страница: 218 / 285

218
Chapter 8 Configuring Hardware and Utilities
8.2.9 Power On/Off Submenu
This submenu appears when selecting "Power On/Off" in the [Advanced] menu.
Use this submenu to configure power On/Off settings.
table: Items on the Power On/Off Submenu
Item Setting Description
Power On Source
BIOS Controlled
(Unchangeable) Configures the power on setting.
Remote • Disabled (At the time of
purchase)
• Enabled
Sets if the power is turned on when the modem
(connected to the serial port) receives a ring
signal.
LAN
• Disabled
• Enabled (At the time of
purchase)
Sets to enable the power to be turned on via LAN
or not.
Wake Up Timer
Disabled (Unchangeable) Sets if the power is turned on at a certain time or
after a certain time has passed. A separate
program is necessary for setting startup time.
Sets the following items if [Wake Up Timer] is
set to "Enabled".
Wake Up Time Sets the startup time when using [Wake Up Timer].
Wake Up Mode Daily (Unchangeable) Sets the startup mode when using [Wake Up
Timer].
Item Specific Help
Change Values -/+
F10
Select Item
Select Menu
Select Sub-Menu Enter
F1
Esc
Help
Exit
F9 Setup Defaults
Save and Exit
Advanced Security Server Exit Main
Power On/Off
Power On Source
Remote:
LAN:
Wake Up Timer:
Wake Up Time:
Wake Up Mode:
Power Off Source
Software:
Power Button:
Power Failure Recovery:
[BIOS Controlled]
[Disabled]
[Enabled]
[Disabled]
[00:00:00]
[Daily]
[Enabled]
[Enabled]
[Previous State]