Fujitsu Siemens Computers PRIMERGY RX100 S4, Руководство пользователя

Страница: 130 / 285

130
Chapter 4 Manual OS Installation
3
Click [Device Manager].
As many [Ethernet controller] items as the installed LAN ports are displayed under [Other
devices].
Double-click each [Ethernet controller] item and perform the following Steps 4 to 11 on all LAN
ports.
When installing the driver, open the Ethernet controller properties and check the corresponding
controller.
• Onboard LAN 1 corresponds with PCI bus 8, device 4, and function 1
• Onboard LAN 2 corresponds with PCI bus 8, device 4, and function 0
4
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
5
Click [Reinstall Driver] in the [General] tab window.
The [Device Driver Upgrade Wizard] window appears.
6
Click [Next].
7
Select [Search for a suitable driver for my device (Recommended)] and click
[Next].
The [Identify Driver File] window appears.
8
Select [Floppy disk drive] in [Search location options] and click [Next].
Detected drivers are displayed.
9
Click [Next].
Driver installation starts. When it is completed, a completion window appears.
10
Click [Finish].
11
Click [Close] to close the properties window.
When [Ethernet controller] items are displayed under [Other devices], perform the above Steps
4 to 11 on all [Ethernet controller] items.
12
Remove the driver disk and restart the system.
When a LAN card is added, the following window may appear at system startup after addition
of a LAN card. Perform the appropriate procedure according to the displayed window.
•When the "New Hardware Detection Wizard" window appears
Insert the driver disk created from the ServerStart CD-ROM and perform Step 6 and
subsequent steps in "Updating LAN Drivers"
•When the [Insert Disk] window prompts you to insert the "Intel PRO Adapter CD-ROM or
floppy disk" or "Intel
®
PRO/1000 Disk Driver"
Insert the driver disk created from the ServerStart CD-ROM and install the driver.