FujiFilm Frontier-S DX100, Руководство по обслуживанию

Страница: 39 / 303

39
2.2 Operation Sequence
DX100 Service Manual
Figure 2-12. Power On Sequence (3)
B
Yes
No
Yes
No
Checks APG flag current position
Controls the drive for position 5.
Checks if it ends with APG flag
unchanged.
Yes
Checks if position 5 has been
reached.
No
Checks APG position sensor output
is high or low.
Checks if the loop is the second try.
Low
High
Configures position 5.
Error
Yes
Controls the drive for position 1.
Checks if it ends with APG flag
unchanged.
Configures position 5 again.
Checks if position 1 has been
No
B-1
B-4
Mechanical error
Configures position 1.
B-4 No
Controls the drive for position 2.
Checks if position 2 has been
reached.
Configures position 2.
B-1 No
Yes
B-5 No
B-5
Check if cutter home sensor is
shaded.
Cutter motor rotation: CW

Checks if it has stopped after travelling
the maximum operating distance.

Checks if Motor error occurs.
Check if cutter home sensor is
shaded.
Cutter motor rotation: CCW
Cutter home positioning setting
Yes
Yes
No
Yes
Yes
No
B-6
C-1

Checks if Print start position reached
flag is 1.

Check if PE sensor detected the paper.
Yes
Checks if Print start position
reached flag is 0.
Checks if Print start position
reached flag is 0.
Roll motor rotation: CCW
PF motor rotation: CCW
Roll motor rotation: CCW
PF motor stop
Check if roll version flag is 0.
Yes
Roll motor rotation (4412 EP)
Roll motor rotation (5239 EP)
Check if roll version flag: 1
Roll motor rotation (5576 EP)
Yes
B-6 No
B-6
B-7
B-7
B-7
Roll motor rotation: CCW
No
APG position: PG+
Yes
Paper jam error
Roll paper feed flag: 0
C
B-2
B-3
Yes
B-2 No
B-3
Error
B-6 No
Checks if position 1 has been
reached.

Checks if it has stopped after travelling
the maximum operating distance.

Checks if Motor error occurs.