FujiFilm Frontier-S DX100, Руководство по обслуживанию

Страница: 214 / 303

214
5.1General Overview
DX100 Service Manual
5.1.3 Description of Adjustments
The following table describes the general outline of the adjustments.
C H E C K
P O I N T
* : The meanings of abbreviations in the Tool column are as follows.
SP = Adjustments using the Service Program
MECH = Mechanical Adjustment (adjustment using a dedicated tool or a commercially available tool)
Table 5-4. Adjustment Items
Class Adjustment Items General Overview
Tool*
Page
SP MECH
Maintenance Counter Reset • Performs the life control of the parts whose life is to be managed (expected remaining life).
• Resets the counter of the replaced parts.
Yes No P. 219
Heat Force Parameter Counter Reset
Resets the Heat Generation Control Sequence Counter.
Yes No P. 220
Nozzle Check pattern print Print a nozzle check pattern.
Yes No P. 222
Head Cleaning Specify the power from the Service Program and execute the head cleaning.
Yes No P. 222
Paper remaining counter Save / Restore Save/restore the paper remaining value.
Yes No P. 222
APG Check Execute the APG check.
Yes No P. 223
AID Inspection Execute the AID Inspection.
Yes No P. 224
Sensor Check Check if the replaced part is operated correctly.
Yes No P. 224
Error History Indicate the error history of the printer.
Yes No P. 225
IES Detection Flag Switch the flag when detected the ink leak in the IES (Ink End Sensor).
Yes No P. 223
Head Cleaning after Replacing Print Head Perform it after replacing the print head.
Yes No P. 225
Adjustment Boards Related NVRAM Data Backup / Restore Backup/restore the NVRAM data when replacing the Main Board.
Yes No P. 226
Image Quality adjustment / Color Calibration
Data Backup / Restore Save/restore the Image Quality Adjustment data and Color Calibration data.
Yes No P. 227
Serial No. / USB-ID Input Performs this item to enable identification of each connected printer by the PC if multiple
printers of the same kind are connected via a USB hub.
Yes No P. 227
NVRAM Initialize Initialize the printer parameter.
Yes No P. 228
Firmware Update Update the firmware.
Yes No P. 229