202B1262575D
3.9 Attaching and Inspecting Balloon
WARNING
Use a disinfected (or sterilized) balloon attachment tool. There is a risk
of infection.
Do not use a balloon on patients allergic to latex. There is a risk of an
anaphylactic reaction.
CAUTION
Do not feed more than 5 ml of water into the balloon. There is a risk of
rupturing the balloon.
[Note] It takes approximately 3 seconds to feed in 5 ml of water. Check the amount of
water to be fed before use.
[Note] If water cannot be discharged or little water is discharged from the balloon, refer to
“Chapter 5 Troubleshooting”.
“Chapter 5 Troubleshooting”
(1) Feed sterile water into the balloon water feed channel by
fully pressing the air/water valve, and discharge air inside
of the balloon water feed channel.
(2) Prepare a balloon and balloon attachment tool.
[Note]
Do not use the balloon if the expiration date has expired.
Chapter 3 Preparation and Inspection Before Use
68
EG580UT_E2-50_202B1262575D.indb 68
2016/07/05 9:28:51
