Fuji Xerox ApeosPort-V C2276 Скачать руководство пользователя страница 520

Страница: 520 / 783

15 Problem Solving

520

Pro

lem

So
lv

016-757

[Cause]

The passcode is incorrect.

[Remedy] Enter the correct passcode.

016-758

[Cause]

The division does not have permission to use the service.

[Remedy] Consult your system administrator.

016-759

[Cause]

The number of pages reached the maximum number of pages for this service.

[Remedy] Consult your system administrator.

016-760

[Cause]

An error occurred during PostScript (optional) processing.

[Remedy] Take one of the following measures:



Set [Image Quality] to [High Speed].



Increase PostScript memory.

For more information on [Image Quality], refer to the help of the print driver. For more information on memory, refer to
"Allocate Memory" (P.243).

016-761

[Cause]

An error occurred during image processing.

[Remedy] Set [Image Quality] to [Standard] and execute the operation again. If the error still is

not resolved, set [Print Page Mode] to [On].

016-762

[Cause]

The specified printer language is not installed on the machine.

[Remedy] For [Parallel] and [USB] in [Print Mode] under [Port Settings], specify correct printer

language.

016-763

[Cause]

Unable to connect to the POP server.

[Remedy] Confirm the POP server IP address set on the machine.

016-764

[Cause]

Unable to connect to the SMTP server.

[Remedy] Consult the SMTP server administrator.

016-765

[Cause]

Unable to send the e-mail because the hard disk on the SMTP server is full.

[Remedy] Consult the SMTP server administrator.

016-766

[Cause]

An error occurred on the SMTP server.

[Remedy] Consult the SMTP server administrator.

016-767

[Cause]

Unable to send the e-mail because the address is not correct.

[Remedy] Confirm the address, and try sending again.

016-768

[Cause]

Unable to connect to the SMTP server because the machine's mail address is incorrect.

[Remedy] Confirm the machine's mail address.

016-769

[Cause]

The SMTP server does not support delivery receipts (DSN).

[Remedy] Send e-mail without setting delivery receipts (DSN).

016-770

[Cause]

Direct Fax is restricted.

[Remedy] Consult your system administrator whether Direct Fax is available. If it is available,

contact our Customer Support Center.

016-772

[Cause]

The DNS server address is not set.

[Remedy] Set the DNS server address.

016-774

[Cause]

Unable to process compression conversion because of insufficient hard disk space.

[Remedy] Delete unnecessary data from the hard disk to free up disk space.

016-775

[Cause]

Unable to process image conversion because of insufficient hard disk space.

[Remedy] Delete unnecessary data from the hard disk to free up disk space.

Error Code

Cause and Remedy

Содержание ApeosPort-V C2276
















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-V C2276

Отзывы:

Бренды по названию

Популярные бренды

Fuji Xerox ApeosPort-V C2276, Руководство администратора

Результаты поиска

Содержание ApeosPort-V C2276

Отзывы:

Бренды по названию

Популярные бренды