6 - 9
INZ-TN2ZKJ-E
t
In the “Auto Calibration Selection”
screen that appears, select “enable” or
“disable” by pressing the
or
key.
After setting, press the
ENT
key.
Example
The components which were set to “enable” is calibrated to Zero at once at the time of
auto calibration regardless of setting in “6.2.2 Setting of manual zero calibration”.
Caution
To close “Setting of Auto Calibration
Component” or to cancel this mode midway,
press the
ESC
key.
A previous screen will return.
To close "Auto Calibration
Component" setting
ESC
(
)
ENT
End of Manual Calibtation Setting
