6 - 4
INZ-TN2ZKJ-E
6.2.2 Setting of manual zero calibration
When zero calibration is made manually, set either all measurement components should be
calibrated simultaneously or each component should be calibrated while selecting one by one.
q
During measurement, press the
MODE
key
to display the User mode.
w
Point the cursor to “Setting about Cali-
bration” by pressing the
or
key.
Press the
ENT
key.
e
In the “Setting about Calibration” screen
that appears, point the cursor to “About
ZERO Calibration” by pressing the
or
key. Press the
ENT
key.
r
In the “Manual Calibration CH Selec-
tion” screen that appears, point the cursor
to CH you want to set by using the
or
key. Press the
ENT
key.
(
)
ENT
(
)
ENT
MODE
(
)
ENT
