Operator’s Manual: Dura Dry II
Foreward
© SP Industries, Inc.
Rev.004, 12/07
6
Always
verify that the electric service and other utilities match the unit’s requirements before
connecting to power.
Always
wear safety glasses when using glass flasks.
Always
practice team lifting when moving heavy equipment.
Always
ensure that refrigeration air intake is clear and clean.
Always
ensure that only an authorized technician services the refrigeration, heat transfer,
vacuum and electrical systems.
Always
assume that internal parts may be very cold or very hot. Utilize personal protective
equipment to avoid burns.
Inspection
This merchandise was carefully packed and thoroughly inspected before leaving our factory.
Save all packing material if apparatus is received damaged.
Responsibility for its safe delivery is assumed by the carrier upon acceptance of the shipment,
therefore, claims for loss or damage sustained in transit must be made upon the carrier by
recipient as follows:
Visible loss or damage
Note any external evidence of loss or damage on the freight bill, or express receipt, and have it
signed by the carrier's agent. Failure to adequately describe any such external evidence of loss
or damage may result in carrier's refusing to honor your damage claim. The form required to file
such a claim will be supplied by the carrier.
Concealed loss or damage
Concealed loss or damage means loss or damage which does not become apparent until the
merchandise has been unpacked and inspected. Should either be discovered, make a written
request for inspection by the carrier's agent with 15 days of the delivery date; then file a claim
with the carrier since the damage is the carrier's responsibility. By following these instructions
carefully, we guarantee our full support of your claim to be compensated for loss from concealed
damage.
Do not -- for any reason -- return this unit without first obtaining authorization. Please
supply nameplate data, including model number and serial number, in any
correspondence to the manufacturer.
WARNING
DO NOT STORE OR PROCESS FLAMMABLE MATERIALS This unit is
not designed (nor is it intended to be used) for the purpose of processing
or storage of materials that may contain volatile flammable solvents or that
may emit flammable vapors during processing or storage.
