Frymaster FQE60U FilterQuick easyTouch, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 42

6-6
SERVICE REQUIRED
10. If a filtration error occurs six consecutive times, the return
valve close
s. Press the √ (check) button to silence alarm
and continue.
ERROR PUMP NOT FILLING
11. The system detects oil is not returning to the vat and
service is required. Call your FAS.
SYSTEM ERROR FIXED?
12. Press the X button to continue cooking if possible. Call your
FAS to repair and reset the fryer. The error will be re-
displaying every 15 minutes until the issue is repaired.
Auto filtration and auto top off are disabled until the fryer
is reset.
ENTER CODE 13. FAS tech enters tech code to reset fryer.
FILL VAT FROM DRAIN PAN?
14. Press the √ (check) button to fill the vat from filter pan to
continue. Follow prompts once the vat is full. Press X to
skip filling from drain pan.
REMOVE PAN 15. Remove the filter pan.
IS PAN EMPTY?
16. Press the √ (check) button if the filter pan is empty and
continue to next step. Press X to continue filling the vat.
Follow the prompts once the vat is full.
17. The controller switches off.
6.2.3.2 Clogged Drain Error
The clogged drain error occurs during auto filtration when the oil level sensor detects that oil has not
completely drained from the frypot. This may be due to a clogged drain or an oil sensor failure. Follow the
instructions on the controller display to clear the error.
When this occurs the controller displays CLEAR DRAIN for 15 seconds changing to IS DRAIN CLEAR?.
1.
Clear debris from the drain using the fryer’s friend and press the √ button to continue.
2.
The controller displays DRAINING. Once the oil level sensor detects the oil has drained, normal auto
filtration operation resumes.
6.2.3.3 Filter Busy
When FILTER BUSY is displayed the filter interface board is waiting on another vat to be filtered or
waiting on another function to finish. Wait 15 minutes to see if problem is corrected. If not, call your
local FAS.
6.2.4 Basket Lift Problems
Problem Probable Causes Corrective Action
Basket lift movement
is jerky and/or noisy.
Basket lift rods need
lubrication.
Apply a light coating of Lubriplate
™
or similar
lightweight white grease to the rod and
bushings.