manualshive.com logo in svg

Fronius IG 2000, Руководство по эксплуатации

Поделиться
Скачать
Fronius IG 2000 Скачать руководство пользователя страница 90

88

408

Direct current feed in

Description

The inverter disconnects from the grid for safety reasons.

Remedy

If status code persists: Contact a Fronius-trained service tech-
nician

409

No +15V supply available for the control electronics

Description

The inverter does not connect to the grid.

Remedy

If status code persists: Contact a Fronius-trained service tech-
nician

410

Service plug was not inserted in its original position

Description

2-pole plug inserted in the wrong socket.

Remedy

If status code persists: Contact a Fronius-trained service tech-
nician

412

The "fixed voltage" setting has been selected instead of MPP voltage operation and the 
voltage is set to too low a value, or DC voltage exceeds allowable limits.

Description

Fixed voltage lower than the current MPP voltage.

Remedy

If the status code persists, you should contact a Fronius-trained 
service technician, or remove excess solar modules so DC volt-
age fits within inverter limits.
If status code persists: Contact a Fronius-trained service tech-
nician

413

Control problems

Description

The inverter briefly disconnects from the grid, if AC voltage or 
frequency are out of range.

Remedy

If status code persists: Contact a Fronius-trained service tech-
nician

414

EEPROM faulty

Description

Memory deleted

Remedy

If status code persists: Contact a Fronius-trained service tech-
nician

Содержание IG 2000





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды