FS3.2780-Manual-34.111XXXXXXXXX.V01-EN03.doc
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden t
o duplicate this manual or parts thereof or any other form without the author’s authorisation © 2018
36
BASIC OPERATING INSTRUCTIONS
Special Functions
There are 11 special functions.
A maximum of 4 Special Functions can be applied to a program; they are shown in the bottom part of
the display (highlighted below with the arrow).
Position of the Special Functions
By pressing the
Function key, the first drawing to appear on the display is the empty one
which corresponds to no function
.
Press
once and the first function appears flashing (the selected one).
Continue pressing
or
to scroll the other functions available in the same position.
When you have selected the function, confirm with
or after 2 seconds of inactivity it will be
stored.
Always press the
function key to switch from one position to another.
If the function has associated parameters:
When you have selected the function with the
or
keys, enter with the
key
:
Example with 1 associated parameter:
If the function has only one parameter, modify the value with the
or
keys.
After 2 seconds of inactivity it will be stored.
After 30 seconds of inactivity you will return to the main page, or
press
.
Example with several associated parameters:
If the function has several parameters, press
to move to the
subsequent parameter
.
To confirm and exit the parameters, press
.
After 2 seconds of inactivity it will be stored.
After 30 seconds of inactivity you will return to the main page, or
press
.
If a function is set and fixed and you press
or
, the function box will return flashing empty.