FS3.2780-Manual-34.111XXXXXXXXX.V01-EN03.doc
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden to duplicate this man
ual or parts thereof or any other form without the author’s authorisation © 2018
31
CONTROL PANEL
Key
Description
Pre-stretch key (ACTIVATED ONLY WITH CARRIAGE 2 MOTORS)
Manual mode:
press Manual selector
blue key (left LED on).
Press Pre-stretch Manual mode key (right LED turns on
(1)
).
This parameter is set on the display.
In Manual mode you can set the film pre-stretch value in
percentage (with values from 100% to 400%, 10% stroke)
using
or
.
Automatic mode:
press Automatic selector
yellow key (right LED on).
Press Pre-stretch Automatic mode key (yellow icon
(2)
).
In Automatic mode you can set the film pre-stretch value in
percentage (with values from 100% to 400%, 10% stroke)
for each wrapping phase: bottom wrapping, carriage up, top
wrapping, carriage down.
To switch from one value to another, use the
key and modify it using
or
. Press
to exit.
Key
Description
Carriage speed key
Manual mode:
press Manual selector
blue key (left LED on).
Press carriage speed Manual mode key (right LED turns on
(1)
).
This parameter is set on the display.
In Manual mode you can set the carriage speed value from a minimum of 1 to a
maximum of 9 with
or
.
Press the
“Up” key in manual mode and the carriage will move until this key has
been pressed again.
Automatic mode:
press Automatic selector
yellow key (right LED on).
Press carriage speed Automatic mode key (yellow icon
(2)
).
In Automatic mode you can set the carriage speed value
both during ascent and during descent.
You can set the carried speed value from a minimum value
of 1 (20Hz) to a maximum of 9 (60Hz).
To switch from one value to another, use the
key and modify it using
or
. Press
to exit.
1
2
1
2