Fromm FS390 Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 44

Fromm FS390 Series Скачать руководство пользователя страница 13

FS3.2780-Manual-34.111XXXXXXXXX.V01-EN03.doc

For further updates, see our website www.fromm-stretch.com and Login!

It is forbidden to duplicate this man

ual or parts thereof or any other form without the author’s authorisation © 2018

13

SAFETY DEVICES

We would like to again highlight how all safety devices have been installed for operator safety,
etc. and must not be manipulated or excluded from the operations.

Refer to the drawings below and to the notes applied.

Observe the control panel

A = Acoustic signal

B = Emergency stop button

C = Main
switch

Main switch:
The power (1x230V) is supplied
by turning on the main switch.
The voltage for the various control
parts (24Vdc) is also supplied by
turning on the machine.

D=  Anti-crushing device

E = Parachute system

R= Reset Button

D = Anti-crushing device

This  mobile  anti-crushing  device  works  with  the  aid  of  4
mechanical sensors.
Each  time  a  foreign  body  touches  the  underside  of  the  carriage,
the  latter  reverses  direction  and  simultaneously  sends  a  signal  to
the turntable to stop in phase.

D = Anti-crushing device

This safety device works with the aid of a photocell and a reflector.
Each time a foreign body gets between the photocell and the
reflector, a signal is sent to the turntable to immediately stop.

E = Parachute system

This mechanical safety device, parachute system, functions
whenever the belt is not tensioned, in other words it stops the
carriage from falling.

D

A

B

C

D

E

R

«
...
11
12
13
14
15
...
»

Содержание FS390 Series













































Отзывы:

Нет отзывов