FS3.2780-Manual-34.111XXXXXXXXX.V01-EN03.doc
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden to duplicate this man
ual or parts thereof or any other form without the author’s authorisation © 2018
35
CONTROL PANEL (Function keys on the operating panel)
FUNCTION
Description
Film cut function
Must be enabled by entering “Menu 1 hidden parameters”, parameter 16 “Film cut
device” = ENABLE.
Only in Automatic Mode:
press Automatic selector
yellow key (right LED on).
Press Film cut Function (yellow icon), LED turns on.
Function specifics:
Select Film c
ut function to enter the parameterisation page where the “film end
length” is set, namely the length of the part of the film that remains between the cut
and the carriage at cycle end.
You can set the film end length value from a minimum of 1 to a maximum of 9 (1
stroke).
Press
to exit.
FUNCTION
Description
Top-press function
Must be enabled by entering “Menu 1 hidden parameters”, parameter 6 “Top-plate
menu enable
” = ENABLE.
Manual Mode:
press Manual selector
blue key (left LED on).
Press Top-press Manual mode key (right LED turns on
(1)
).
In Manual mode this drawing appears on the display and by using the
key it
moves until the package is touched.
Remaining in manual mode, the Pre-stretch, carriage speed,
carriage stretch, top and bottom wrapping, and turntable speed
keys can be accessed.
Automatic Mode:
press Automatic selector
yellow key (right LED on).
Press Top-press function Automatic mode key (left LED turns on
(2)
).
In Automatic mode when
is pressed, the Top-press descends until it touches
the package and the cycle starts.
At the end of the cycle, the Top-press will rise to the end of the column and
release the package.
1
2