M A D E I N I T A L Y
R
F
M
B
I
K
E
ASSEMBLING THE ANAKIN
Assembly the Anakin certainly does not require a
magic wand; in any case it is necessary to
proceed with caution and care.
Assembly by unskilled hands can compromise the
safety of your bike.
First of all we invite you to familiarize yourself with
the components of your Anakin
CHECKING THE CONTENTS OF THE BOX
The box contains the assembled frame with the
rear wheel mounted and all the components, the
unmounted front wheel (possibly packed in a
special bag), the saddle with the seatpost.
GENERAL INDICATIONS FOR ASSEMBLING
THE MTB
Your Anakin has been completely assembled and
tested by our mechanics. At the end of the opera-
tions described below, the bike is fully functional
without the need to adjust it. Once all the opera-
tions have been completed, take it for a test ride in
a quiet square or on a road with little traffic.
The following is a brief description of how to
assemble your bicycle. If you do not have
sufficient knowledge or experience, you should
contact your local mechanic.
ASSEMBLING THE ANAKIN - TOOLS
The following tools are required to assemble
your Anakin:
-Torque wrench with 6 and 4mm Allen bits
-Torx d 25
When assembling the Anakin, do not clamp it
to a frame tube, but instead clamp it to the
mounting stand using the aluminum seat-
post.
Assembling can be done more easily and
safely if you have a mounting stand or if you
have an assistant
