Fritsch ANALYSETTE 28 IMAGESIZER, Руководство по эксплуатации

Страница: 36 / 66

5.2.2 Funnel holder 250 ml
For little or very fine sample material, the 250 ml funnel can be placed
with the funnel holder further forward on the vibration feeder. To do so,
mount the additional funnel holder for the 250 ml funnel onto the main
funnel holder in the same way as the large funnel. Then set the 250 ml
funnel into the funnel holder for 250 ml and screw it tight with the
clamping screws.
5.2.3 Adjusting the funnel height
Depending on the flowing properties and size of the
material, a smaller gap (for fine powder with good
flowing properties) or a larger gap (for coarse material)
between the funnel and the feeder is needed. The gap
to the feeder should be about three times the maximum
diameter of the material.
Turn the knurled screw on the top of the funnel support column in
order to move the funnel up and down.
5.3 Wet measurement
5.3.1 Inserting the measuring cell
1. Open the housing flap.
2. Unlock the centring plate and hinge it backwards.
3. Close the housing flap again.
Using the device
- 36 -