Friedrich FSHW091, Руководство по обслуживанию и запасным частям

Страница: 76 / 171

76 PB
Wired Controller FSWC1 Owner's Manual
5
3.2 On/Off
When the wired control is on main page, press ON/OFF button to turn on the unit.
Press ON/OFF button again to turn off the unit. The interfaces of On/Off status are
shown in Fig. 4 and Fig. 5.
Fig. 4 Off interface Fig. 5 On interface
3.3 Mode Setting
Under On status, pressing MODE button can set mode circularly as:
Note:
If save function is on, auto mode is not available.
(
COOLING
) (
DRY
) (
FAN
) (
HEATING
)
3.4 Temperature Setting
Under unit on status, pressing “ ∧ ” or “ ∨ ” button on the main page increases or
decreases set temperature by 1 ℃ (1 ℉ ); holding “ ∧ ” or “ ∨ ” button increases or
decreases set temperature by 1 ℃ (1 ℉ ) every 0.3s.
In cooling,dry,fan and heating mode,temperature setting range is 16 ℃ ～ 30 ℃
(61
℉ ～
86
℉
). Under auto mode, set temperature cannot be adjusted.
(
AUTO
)
3.5 Fan Setting
Under On status, pressing FAN button can set fan speed circularly as:
Low → Medium →Hi gh → Turbo →A uto → Low
Symbols displayed are as shown in Fig. 6.
Fig. 6 Fan setting
TURBO AUTO
MON
SET
MON
SET
AUTO
26
C
26
C
WIRED CONTROLLER
Operation Instructions