
en / 2-11
OPERATION AND USE
3.4.1.5
START PROGRAM
After you have set or loaded a program, it can be
started from standby mode.
Press the START/STOP-key (B6) to start the
program in the working memory. The ON
indicator lights up.
3.4.1.6
INDICATIONS DURING
OPERATION
The process indicators (B2, B4 and B3)
indicate which processes (cooking, grilling,
keeping warm) still have to be carried out.
When a process is finished the corresponding
indicator switches off.
The time display (B1) shows the remaining
program time, which means the cooking and
grilling time added up.
The temperature display also shows the
temperature inside the grill if this is higher than
40
°
C or 125
°
F. At lower temperatures it
shows ‘Prh’ (Preheating) as an indicator that
the grill is heating up.
When the remaining program time has reached
‘0’,theprocessandtheONindicatorsswitchoff.
After a process has started the current program
number can be read as follows:
Press the program key (B23), above which
the indicator lights.
The temperature display (B27) shows the pro-
gram number and the time display (B1) shows
the indication 15Pr.
They switch off when you release the pushbutton.
3.4.1.7
SHOWING TIME AND
TEMPERATURE
3.4.1.7.1
Showing set time and
temperature
It is possible to show the set time and temperature
for the various programs.
Press the key for the required process (B8,
B9 or B10). The display now shows the set
values for the selected process.
Let the key go.
3.4.1.7.2
Show measuring value
temperature sensor
See chapter 3.4.12.2.
3.4.1.8
CHANGE ACTIVE PROGRAM
SETTINGS
During the execution of a program only the set-
ting for the current program can be changed.
This also goes for interrupted programs.
The changes do not have any influence on the
original stored program.
3.4.1.8.1
Time setting
Keep the time key (B17) pressed.
Press the ON (B19) or DOWN (B16) key to
change the time.
Release the time key.
3.4.1.8.2
Temperature setting
Keep the temperature key (B18) pressed.
Press the key UP (B19) or DOWN (B16) to
change the required temperature.
Release the temperature key.
3.4.1.9
INTERRUPTING PROGRAM
3.4.1.9.1
Interrupting the active program
Press the rotor key (B7).
The heating elements and the lamp on the ser-
ving side switch off; the spit stops turning.
The process time no longer counts down and
the ON indicator (B5) starts flashing.
Содержание STG5
Страница 1: ...STG 5 STG7 09 2005 DIRECTIONS FOR USE en 2 1 STG5 STG7 ...
Страница 3: ......
Страница 23: ......