
en / 2-7
3.2.3
Loading the grill with meat baskets
(accessory)
Push the ends of the meat baskets/chicken
racks in the corresponding holes of the rotor
disks (see figure 3.2).
Fill the baskets/chicken racks in such a way
that the grill is evenly loaded and that no bits
of meat stick out of the baskets.
3.2.4
Loading the grill with a turkey spit
(accessory)
Fit a spit clamp onto the turkey spit.
Prick the point of the turkey spit through the
turkey along its length.
Fit the other spit clamp and push both clamps
into the turkey.
Fit the bearing piece.
Securely tighten the butterfly nuts.
Remove the rotor disk together with its pivot.
Place the turkey spit in the grill.
3.2.5
Loading the grill with two different
accessories
When you want to load the grill with two different
accessories at the same time you should always
fit one less accessory in the rotor than the maxi-
mum possible.
You should fit accessories of the same sort in
successive positions.
For example
For STG5:
2 spits + 2 baskets in series.
For STG7:
3 spits + 3 baskets in series.
Mount the spits in the rotor disks so that the
breast of the chicken points towards the
customer during the grilling process.
Push the points of the spit into the appro-
priate holes in the rotor disk (see figure 3.2).
Put the other end into the corresponding
holes in the opposite disk.
Figure 3.2
To mount the other spits in the grill proceed
as follows:
Set the main switch to ‘1’.
Press the rotor switch (B7) on the programm-
able unit every time to start the rotor and to
stop it.
3.2.2
Loading the grill with baking trays
(accessory)
Push the ends of the baking trays into the
correct holes in the rotor disks (see figure 3.2).
Fill the baking trays so that the products
cannot fall out during grilling.
OPERATION AND USE
Holes for spits
Hole for meat baskets
or chicken racks
STG7
Hole voor meat baskets
or baking trays
STG5
Содержание STG5
Страница 1: ...STG 5 STG7 09 2005 DIRECTIONS FOR USE en 2 1 STG5 STG7 ...
Страница 3: ......
Страница 23: ......