Fresmak 040 410 090, Руководство по обслуживанию

Страница: 8 / 36

7 8
SERVICE MANUAL
w
This machine vice is guaranteed for quality, and workmanship. It has been prepared for its correct
operation through our established final assembly and test procedures. Care should be taken that it is
used correctly to ensure the operators and other persons safety in the workplace.
w
Each person involved in the unpacking, handling, operation and maintenance of this vice is re -
quired to have to read this service manual. This is to ensure safety at work compliance, and the correct
understanding of the vice operation.
w
The operator has to be minimum 18-years of age, it must be ensured that the operator is capable
or has to be trained on the correct vice operation by someone more senior. The operator must be able to
prove his capabilities for its handling and operation and have read and understood this service manual
and keep it available for reference.
Personal protection.-
w
Security shoes (steel toecap type).
w
Protecting gloves.
w
Machine guards, safety glasses.
Worklace .-
w
The vice must be clamped firmly to the machine table to avoid movements during a machining
operation.
w
Ensure the vice jaw movements are not impeded in any way,keep the work area tidy.
Moving the vice.-
w
Care should be taken when moving the vice. The operator must keep clear of the crane or other
lifting equipment used.
Unpacking the vice .-
w
To proceed with unpacking the vice, a hoist should be used for lifting with the two slings supplied,
making sure the load is correctly balanced.
w
The vice is wrapped in oiled paper for its protection during delivery. Ensure that when the oiled pa -
per is removed from its base it is immediately placed on a “cleaned” machine table and clamped safely
in position.
Cleaning and general maintenance.-
w
To ensure the vice long operational life and the most favourable working conditions, it is essential
that it is cleaned very regularly, after each machining cycle of swarf or machining sludge that can affect
its correct operation.
The regular “cleaning” can be by pressure coolant gun or air gun. Together the use of a small brush
to clear the jaw movement ways can generally be effective. Cleaning by industrial rag or paper can also
usefully be done after a number of machining cycles. It must be understood that the efficient vice opera -
tion needs clear space for clamping and unclamping. Warning: never use chemical products which can
damage the vice.