25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
SPPDF-01 Development Suite
User’s Manual
Filter Coefficient Generator
Chapter II
2.1.
FCG Installation and Startup:
Install the FCG software by inserting the CDDF-01 disk into the PC, CDRom drive.
Select the drive in Explorer or use the RUN menu.
CLICK on the Filter Coefficient Generator folder, then
CLICK on "SETUP" and follow the instructions on the installation window.
After installation of the software, two shortcuts will be inserted on the desktop, namely
FCG and FCGScript. Configure the software to run under the installed version of MatLab
TM
by
running the FCGConfig file located under the FCG directory, Program Files in the Windows direc-
tory. The FCGConfig program will ask and set the location of your MatLab
TM
engine file:
matlab.exe.
After configuring the environment, DOUBLE CLICK on the new short cut called FCG on
the PC desktop to start the program.
The experienced user may skip the above steps by loading the MatLab
TM
environment,
going to the specific directories, and making the necessary initializations and M-file calls from
within MatLab
TM
. This will automatically invoke the FCG main panel GUI.
2.2 FCG GUI Control Group Descriptions
The components of the main panel are shown in the Figure 2 below:
Figure 2 – Filter Coefficient Generator Main Panel
6
