25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
SPPDF-01 Development Suite
User’s Manual
Filter Coefficient Loader
Chapter III
After installation of the software, two shortcuts are inserted on the desktop, namely FCL
and FCLScript. The software must be configured to run under the installed version of MatLab
TM
by running the FCLConfig file located under the FCG directory Program Files in the Windows
directory. The FCLConfig program will ask and set the location of the MatLab
TM
engine file: mat-
lab.exe. After configuring the environment, DOUBLE CLICK on the new short cut called FCL on
the PC desktop to start the program.
The experienced user may skip the above steps by loading the MatLab
TM
environment,
going to the specific directories, and making the necessary initializations and M-file calls from
within MatLab
TM
. This will automatically invoke the FCL main panel GUI.
3.3 FCL GUI Main Panel:
The components of the FCL, GUI Main Panel are shown in the Figure 3 below:
Figure 3 - Filter Coefficient Loader GUI Main Panel
The main panel is divided into five functional groups. Note: All entries or selections
must be completed in all groups before the "Program" command (Item 18) is executed.
3.3.1 Group A, Filter (Items 1 - 5) - contains the controls necessary to specify the
parameters used for loading sets of coefficients for single or multiple filters over a
predefined bandwidth.
11
