51
P6F104 User’s Manual
3.11 Load Optimized Default
“LOAD Optimized Default” loads optimal settings which are stored in the
BIOS ROM.
The defaults loaded only affect the Advanced BIOS Features, Advanced
Chipset Features, Integrated Peripherial, Power Management Setup, PnP/
PCI configurations, PC Health Monitor and Frequency/Voltage Control.
There is no effect on the Standard CMOS Setup. To use this feature, high-
light on the main screen and press <Enter>. A line will appear on the
screen asking if you want to load the Setup default values. Press the <Y>
key and then press the <Enter> key if you want to load the Setup defaults.
Press <N> if you don’t want to proceed.
3.12 Set Supervisor/ User Password
The “SUPERVISOR/USER PASSWORD” utility sets the password.
The Mainboard is shipped with the password disabled. If you want to
change the password, you must first enter the current password, then at
the prompt enter your new password. The password is case sensitive
and you can use up to 8 alphanumeric characters, press <Enter> after
entering the password. At the next prompt, confirm the new password
by typing it and pressing <Enter> again.
To disable the password, press the <Enter> key instead of entering a
new password when the “Enter Password” dialog box appears. A mes-
sage will appear confirming that the password is disabled.
If you have set both supervisor and user password, only the supervisor
password allows you to enter the BIOS SETUP PROGRAM.
If you forget your password, the only way to solve this problem is
to discharge the CMOS memory by turning power off and placing
a shunt on the JP23 to short pin 2 and pin 3 for 5 seconds, then
putting the shunt back to pin1 and pin2 of JP23.
Chapter 3: BIOS Configuration
